What's the deal with these ones? We have a limited number of our UMB-2 bases up for grabs. These units might have been used for something in the shop, been an off color, might have some small molding defect. All of them are physically fine and useable. Might come as white or black depending on what we have.
Update 3/4/2019 - All of our current stock of bases are molded out of ABS, not PVC. There is no notable structural differences but you cannot attach them with PVC Cement. Included screws must be used!
Our new bases feature a pipe socket that 50% deeper and support ribs that run all the way up the fitting to provide better overall stability. We have also included a center mark in the bottom of the pipe socket to allow for easy drilling in projects where this might be required (such as using rebar in the ground to make your props stand). These new bases feature the same footprint and bolt pattern as the UMB-1 and are a direct replacement for them.
Help your props make a stand. This base creates an easy mounting point for your projects. It also is a great way to attach footwear to your dummy making setup and storage a breeze. The fitting accepts 1 inch Schedule 40 pipe and attached using the included screws. There are four 3/16" mounting holes in the bottom of the base. Made of durable ABS. 2 self drilling screws are included.
Dimensions: 3" wide x 1 11/16" highInlet: 1.320" ID x 1.5" depth (works with 1 inch Schedule 40 PVC pipe)
Copyright Spider Hill Prop Works. All Rights Reserved. eCommerce Software by 3dcart.
