Animated Watchman (Includes Pipe)

Question

Q: I'm interested in your animated watchman kit, but was wondering where I could pick up the mask and hands? Thanks in advance.

Asked by: Jim - 1/31/2016

Q: Hi, it's me again. I was just wondering how do you place any shoes or any feet prosthetic on your animatronics and props?

Asked by: Ian M. - 12/28/2019

Q: How do you attach the lantern to the animated watchman? I will be purchasing your kit and the ghostride old timer hands

Asked by: Ernie - 11/10/2020

Q: I have been looking for the watchmen and finally found it..im interested in making a purchase but before I do, can you answer a question for me. If I purchase it, does it come with the head and hands or will I still need to purchase them elsewhere?

Asked by: Greg - 6/11/2022

Q: Where did you get the hands for your watchman?

Asked by: El - 7/28/2022

Q: Where did you get the head and arms for the Watchmant Animated Prop. 2.) What size do you recommend making your wooden prop bases for optimum stability?

Asked by: Michael C McDonald - 7/8/2021

Q: What is the difference between the complete kit snd yhdd red one that isn’t

Asked by: Danielle - 7/11/2021

Q: Good morning! Can you clarify the difference between the basic and complete kit for the watchman? Thank you!

Asked by: Jason McCracken - 9/6/2021

No Answers have been submitted yet.

Q: Does this kit come with a wiper motor ?

Asked by: Shawn Harrah - 9/24/2021

Q: How tall is the complete watchman?

Asked by: C. G. - 4/21/2022

Questions about this item? Ask here.

Accepted Answer

A: Hello, The head and hands for that prop came from Ghost Ride Productions. The head is called Old Timer, and the hands are their Care Taker hands. www.ghostride.com

Was this answer helpful? 17 of 17 Customer(s) found this Answer helpful.

Answer provided by: SHPW Admin (1/31/2016)

Accepted Answer

A: Hi Ian! I typically use a 3 inch hole-saw to cut out the heel of the shoe or boot and then I place the footwear down over our mounting base. If you still need help, shoot me an email and I can send you some pictures. Thanks!

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Spider Hill Prop Works (12/28/2019)

Accepted Answer

Hello, getting the lantern attached to the hand takes a little finesse. I start by carefully making a hole from one side of the hand to the other. A long awl or thin piece of metal rod will work. You need to push and twist it through the foam so it drills its way through without tearing it. Getting the lantern's handle through the hand requires removing it from the lantern and straightening one of the ends of the handle. Once that is done, you need to straighten about half of the handle itself and then you can carefully push it through the hole in the hand. Once again take care not to tear the foam. Once it is through you can re-bend it to the desired shape and reattach the lantern. I recommend removing the lantern for storage in the off season to protect the foam.

Accepted Answer

A: Hello, currently none of our kits come with heads or hands and would need to be purchased separately. If you are interested the head and hands shown on that prop are from Ghost Ride Productions. Thanks!

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Spider Hill Prop Works (6/11/2022)

Accepted Answer

A: Hello, Both the hands and the heads on our Watchman came from Ghost Ride Productions. Thanks!

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Spider Hill Prop Works (7/30/2022)

Accepted Answer

A: 1) the body parts for this prop came from www.ghostride.com 2) we use 3/4" plywood 24 inches wide x 15 inches deep on most of our animated props.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Spider Hill Prop Works (7/8/2021)

Accepted Answer

A: Hello, The Complete kits come with all of the necessary precut PVC pipe lengths needed to assemble the kit, with the Basic kits, you supply and cut your own pipe. All of the hardware and included items are the same beyond that.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Spider Hill Prop Works (7/12/2021)

Accepted Answer

A: Yes, All of our animated kits include the wiper motor.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Spider Hill Prop Works (9/25/2021)

Accepted Answer

A: Hello, depending on the head you use, the prop will be right around 6 feet tall. The Watchman can be cut down or made taller very easily. Thanks!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Spider Hill Prop Works (4/21/2022)

Animated Watchman (Includes Pipe)

Quantity Pricing

Average Customer Ratings

Related Items