Basic Kit - You supply and cut all of the PVC pipe needed to complete the prop.
Complete Kit - We provide all of the precut PVC pipe needed to complete the prop.
Please read the product description completely before ordering. If you have any additional questions, please feel free to contact us.
Like all of our kits, we've taken the hassle and guesswork out of building animated props. With minimal care, this kit should last you a very long time. Should it ever need repair, most of the parts can be sourced locally. We will also continue to provide support and parts for any kit that we sell.
Items included in the Basic Kit:
(1) Machined aluminum motor base mount (completely assembled)
(1) 12 volt DC wiper motor (installed)
(1) 12 volt DC 5 amp wiper motor power supply with PWM Speed Controller (assembled)
(1) Assembled set of motor drive arms with hardware
(2) 1 inch PVC T fittings with reducers installed
(1) 1 inch PVC cross fitting with reducer and 4" x 1/2" PVC neck pipe
(1) 1 inch x 4 inch PVC spine with bronze bushings installed
(4) SJ-1 PVC Spider Joint fittings with fender washers installed
(1) Tube silicone grease
(26) Self drilling screws
(9) Wood Screws
(2) 2" x 2" steel L brackets with mounting hardware (2) 10/24 x 2" truss head machine screws (4) 10/24 nylon insert hex nuts
Assembly instructions
What will I need to build this prop kit as shown here?
(1) 6" x 24" x 3/4" wood base (minimum needed)
(6) Feet of 1 inch schedule 40 PVC pipe
(2) Feet of 1/2 inch schedule 40 PVC pipe
All of the screws and hardware needed are included!
Head, Hands, and Clothing are not included!
Assembled kit is 21 inches tall (top of the neck pipe) and 38 inches from elbow to elbow at the lowest position.
Assembled kit is 27 inches tall (top of the neck pipe) and 31 inches from elbow to elbow at the highest position.
Tools needed to complete this build:
Tape measure
Pencil
Straight edge ruler
An awl or a nail for marking holes
Hacksaw or PVC cutter (basic kit only)
Cordless drill
Phillips screwdriver
Rubber mallet
1/16" drill bit
3/16" drill bit
1/2" wood paddle bit
Phillips head bit