The New Spider Joints are here!
All joints now feature a locking insert that allows them to be tightened using only one hand/one tool instead of two. They also now contain a set of fine locking teeth on the mating surface that give the joints the ability to lock and hold their position even under increased loads.
These joints can still be used in an animated prop where you need them to move. It will require adding a 1 1/2 inch OD x 1/4 inch ID fender washer between the 2 parts. Please contact us if you need any help.
This fitting allows you to create an adjustable elbow joint between two pieces of 1 inch Schedule 40 PVC pipe. Great for Shoulders, Elbows, Hips and Knees. This fitting can be glued using PVC cement, or attached using screws. There are slots in the ends of the fitting that will allow the joint to be rotated when mounted to the pipe using screws. Features include, zinc plated hardware, nylon insert lock nut, and self drilling screws (2 included). Made of durable PVC.
Dimensions: 5 3/4" long x 1 5/8" wide
Inlet: 1.320" ID x 1" depth (works with 1 inch Schedule 40 PVC pipe)
NOTE: These fittings are for decorative purposes only. They have not been designed or tested to be used as structural or load bearing devices!