Based on the successful design of our Watchman and Compact Prop Turner. This mechanism was designed to rotate a prop from side to side while mounted with the output shaft in the horizontal position. This well built mechanism features an aluminum machined frame, and a 1/2" steel output shaft that rides on (2) sealed bearing assemblies. It is powered by a Fright Props wiper motor and is driven by a nylon roller and a UHMW plastic drive arm for long life and quiet operation. It also includes a 2 3/4" diameter die cast hub for easy prop attachment.
This kit includes:
(1) Assembled prop turning mechanism
(6) #10 x 3/4" mounting screws
Instructions
POWER SUPPLY IS NOT INCLUDED! We recommend using a 12 volt 5 amp power supply paired with a PWM (speed controller) board to obtain the desired movement from the mechanism. See our Prop Power Kit item# PPK-1.
Weight: 6.9 lbs
Installation notes:
Mechanism is designed to be mounted on a vertical surface only with the output shaft in the horizontal position.
Unit should be mounted to a flat surface utilizing all mounting points to provide the maximum rigidity.
Keep the unit dry. If you plan to use it outdoors, you must provide some reasonable protection from the elements.
