What will I need to build this prop kit as shown here?
(11) Feet of 1 inch Schedule 40 PVC Pipe.
(1) 24" x 15" x 3/4" wood base
All of the screws and hardware needed are included!
Please read the product description completely before ordering. If you have any additional questions, please feel free to contact us.
You can view the complete plans for this kit HERE
We designed this kit to allow you to build your own custom animated prop without all of the hassle of chasing down a bunch of parts. With minimal care, this kit should last you a very long time. Should it ever need repair, most of the parts can be sourced locally. We also will continue to provide support and parts for any kit that we sell.
Items included in the Basic Kit:
(1) Precision machined aluminum waist platform (completely assembled as shown)
(1) 12 volt wiper motor with low friction drive arm roller
(1) 12 volt 5 amp wiper motor power supply, PWM Speed Controller, and wiring harness kit. (See Product PPK-1)
(6) UMB-1 Universal Mounting Bases
(2) ST-1 1 inch PVC slip-T fittings
(1) 1 inch PVC cross fitting
(3) 1 inch PVC 45 degree elbow fitting
(1) 1 inch PVC 90 degree elbow fitting
(2) 1 inch PVC cap fittings
(1) 4 inch x 1/2 inch PVC neck pipe and reducer
(2) Wire fasteners for attaching arms
(24) Self drilling screws
(8) Wood Screws
(1) Spine and swivel crossbar assembly (assembled)
Height of kit will be about 6 feet tall when assembled depending on the head you choose.
Tools needed to complete this build:
Hacksaw or PVC cutter
Needle nose pliers